Motorola AP-7131N-FGR Product Reference Manual page 356

8-18 AP-7131N-FGR Access Point Product Reference Guide
AP7131N>admin(network.lan.bridge)> set
Description:
Sets the mesh configuration parameters for the access point's LANs.
Syntax:
set priority <LAN-idx>
hello <LAN-idx>
msgage <LAN-idx>
fwddelay <LAN-idx>
ageout <LAN-idx>
Example:
admin(network.lan.bridge)>set priority 2 63335
admin(network.lan.bridge)>set hello 2 2
admin(network.lan.bridge)>set msgage 2 20
admin(network.lan.bridge)>set fwddelay 2 15
admin(network.lan.bridge)>set ageout 2 300
admin(network.lan.bridge)>show
** LAN1 Mesh Configuration **
Bridge Priority
Hello Time (seconds)
Message Age Time (seconds)
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds)
** LAN2 Mesh Configuration **
Bridge Priority
Hello Time (seconds)
Message Age Time (seconds)
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds)
For an overview of the access point's mesh networking options using the applet (GUI), see
<seconds> Sets bridge priority time in seconds (0-65535) for specified LAN.
<seconds> Sets bridge hello time in seconds (0-10) for specified LAN.
<seconds> Sets bridge message age time in seconds (6-40) for specified LAN.
<seconds> Sets bridge forward delay time in seconds (4-30) for specified LAN.
<seconds> Sets bridge forward table entry time in seconds (4-3600) for specified LAN.
:63335
:2
:20
:300
:63335
:2
:20
:300
Configuring Mesh Networking on page 9-1.