Motorola AP-7131N-FGR Product Reference Manual page 166

Hide thumbs Also See for AP-7131N-FGR:

Table of Contents

AP-7131N-FGR Access Point Product Reference Guide

2. Refer to the

WAN IP Configuration

field to enable the WAN interface, and set network

address information for the WAN connection.

NOTE Motorola recommends that the WAN and LAN ports should not both be

configured as DHCP clients.

Enable WAN Interface Select the

Enable WAN Interface

checkbox to enable a

access point

connection between the

and a larger network or

outside world through the WAN port.

access point

Disable this option to effectively isolate the

No connections to a larger network or the Internet are possible.

MUs cannot communicate beyond the LAN.

By default, the WAN port is static with an IP address of 10.1.1.1.