Motorola AP-7131N-FGR Product Reference Manual page 661

2. Select the Auto Discovery Enable
Enabling auto discovery will allow the AAP to be detected by a switch once its connectivity
medium has been configured (by completing steps 3-6)
3. Enter up to 12 Switch IP Addresses
connection.
The AAP will begin establishing a connection with the first addresses in the list. If
unsuccessful, the AP will continue down the list (in order) until a connection is established.
4. If a numerical IP address is unknown, but you know a switch's fully qualified domain name
(FQDN), enter the name as the
5. Select the Enable AP-Switch Tunnel
switch using a secure VPN tunnel.
6. If using IPSec as the tunnel resource, enter the IPSec
checkbox.
constituting the target switches available for AAP
Switch FQDN value.
option to allow AAP configuration data to reach a
Passkey
Adaptive AP
to ensure IPSec connectivity.
10-13