Motorola AP-7131N-FGR Product Reference Manual page 450

8-112 AP-7131N-FGR Access Point Product Reference Guide
AP7131N>admin(network.wireless.radio.802-11n[5.0 GHz])> set
Description:
Defines specific 802.11n (5.0 GHz) radio parameters.
Syntax:
set placement
ch-mode
channel
power
rf-mode
rates
beacon
dtim
aggr
shortgi
rts
range
qos
qbss-beacon
qbss-mode
single-antenna
Example:
admin(network.wireless.radio.802-11n[5.0 GHz])>
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[2.4
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[5.0
admin(network.wireless.radio.802-11n[2.4
For information on configuring the Radio 2 Configuration options available to the access point using the applet (GUI), see
Configuring the 802.11a/n or 802.11b/g/n Radio on page
Defines the access point radio placement as indoors or outdoors.
Determines how the radio channel is selected.
Defines the actual channel used by the radio. Channel allowed depends on actual country of operation.
Defines the antenna power transmit level. Depends on radio type, channel and country.
Sets the default rates for the 802.11 mode selected (a-only, n-only, or a-and-n).
Sets the supported radio transmit rates.
Sets the beacon interval used by the radio.
Defines the DTIM interval (by index) used by the radio.
Sets the radio's aggregation.
Enables/disables a short guard interval of 40MHz.
Defines the RTS Threshold value for the radio.
Sets the radio's extended range (in miles 0-50).
Defines the param-set, cwmin, cwmax, aifsn and txops levels for the QoS policy used for the 5.0 GHz radio.
Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).
Enables/disables the QBSS load element.
Enables/disables single antenna support. Enable (default setting) to decrease sensitivity and device retries.
GHz])>set placement indoor
GHz])>set ch-mode auto-40
GHz])>set channel 11
GHz])>set power 4
GHz])>set rates 10
GHz])>set beacon 100
GHz])>set dtim 1 10
GHz])>set aggr ampdu enable
GHz])>set shortgi disable
GHz])>set rts 2341
GHz])>set range 40
GHz])>set qbss-beacon 110
GHz])>set qbss-mode enable
GHz])>set single-antenna disable
5-59.