Motorola AP-7131N-FGR Product Reference Manual page 243

Use the access point's
each filter for maximum security. Disable a filter if the corresponding attack does not seem a threat
in order to reduce processor overhead. Use the WLAN Security screens as required for setting user
authentication and data encryption parameters.
To configure the access point firewall settings:
1. Select Network Configuration
2. Refer to the Global Firewall Disable
Disable Firewall
Firewall screen to enable or disable the configurable firewall filters. Enable
->
Select the Disable Firewall
functions on the access point. This includes firewall filters, NAT, VP,
content filtering, and subnet access. Disabling the access point
firewall makes the access point vulnerable to data attacks and is
not recommended during normal operation if using the WAN port.
Firewall from the access point menu tree.
field to enable or disable the access point firewall.
checkbox to disable all firewall
Configuring Access Point Security 6-15