Motorola AP-7131N-FGR Product Reference Manual page 406

8-68 AP-7131N-FGR Access Point Product Reference Guide
AP7131N>admin(network.wireless.wlan)> create
Description:
Defines the parameters of a new WLAN.
Syntax:
create
show
set
add-wlan
Example:
admin(network.wireless.wlan.create)>show wlan
ESS Identifier
WLAN Name
802.11n (5.0 GHz) Radio
802.11n (2.4 GHz) Radio
Client Bridge Mesh Backhaul
Hotspot
Maximum MUs
MU Idle Timeout
Security Policy
MU Access Control
disallow MU to MU
Use Secure Beacon
wlan <number> Displays newly created WLAN and policy number.
ess <essid>
<name>
wlan-name
5.0GHz <mode>
2.4Ghz <mode>
mesh <mode>
hotspot <mode>
max-mu <number> Defines the maximum number of MU able to operate within the WLAN
idle- timeout <minutes> Sets the interval the access point uses to timeout idle MUs from WLAN
security <name>
acl <name>
passwd <ascii
string>
no-mu-mu <mode>
sbeacon <mode>
bcast <mode>
qos <name>
rate-limiting <mode>
limit w2wl <rate limit> Sets the per-mu rate limit in kb (in the wired-to-wireless direction)
limit wl2w <rate limit> Sets the per-mu rate limit in kb (in the wireless-to-wired direction)
Defines the ESSID for a target WLAN.
Determines the name of this particlular WLAN (1-32).
Enables or disables access to the access point 5.0 GHz radio.
Enables or disables access to the access point 2.4 GHz radio.
Enables or disables the Client Bridge Mesh Backhaul option.
Enables or disables the Hotspot mode.
(default = 127 MUs).
inclusion. Set between 1 -65532 minutes. Default is 30 minutes.
Sets the security policy to the WLAN (1-32).
Sets the MU ACL policy to the WLAN (1-32).
Defines a password used if the WLAN's security policy uses a server-
based authentication scheme.
Enables or disables MUs associated to the same WLAN to not
communicate with each other.
Enables or disables the AP from transmitting the ESSID in the beacon.
Enables or disables the access point from accepting broadcast IDs from
MUs. Broadcast IDs are transmitted without security.
The index name representing the QoS policy used with this WLAN.
Apply the changes to the modified WLAN and exit.
Enables or disables MU Rate Limiting
:
:
: available
: not available
: not available
: not available
: 127
: 30
: Default
:
: disable
: disable