Motorola AP-7131N-FGR Product Reference Manual page 150

5-2 AP-7131N-FGR Access Point Product Reference Guide
For information on locating the access point's MAC addresses, see
7-2 and Viewing LAN Statistics on page
Use the LAN Configuration
assign them names, define which LAN is currently active on the access point Ethernet port and assign
a timeout value to disable the LAN connection if no data traffic is detected within a defined interval.
To configure the access point LAN interface:
1. Select Network Configuration
2. Configure the
assign a timeout value, enable 802.1q trunking, configure WLAN mapping and enable
802.1x port authentication.
7-6.
screen to enable one (or both) of the access point's LAN interfaces,
->
LAN Settings field to enable the access point LAN1 and/or LAN2 interface,
LAN from the access point menu tree.
Viewing WAN Statistics on page