Motorola AP-7131N-FGR Product Reference Manual page 78

3-10 AP-7131N-FGR Access Point Product Reference Guide
Time Server
WIPS Servers
NOTE The System Name and Country are also configurable within the
4. Refer to the new
by the access point's radio(s). Remember, the options available depend on the radio model
SKU deployed.
A dual radio model access point displays 7 configuration options. Refer to the following
table for the options available to dual radio models.
Radio Button
2.4 GHz WLAN,
& Sensor
5.0 GHz WLAN
& Sensor
2.4 GHz WLAN &
5.0 GHz WLAN only - no Sensor
Sensor only Spectrum Analysis mode
(no WLAN)
2.4 GHz WLAN - no Sensor
Optionally enter the IP address of the server used to provide system time to the
access point within the
access point's Network Time Protocol (NTP) functionality is engaged
With the AP-7131N-FGR, a VPN tunnel is established using
automatically.
the NTP server.
Refer to
44 for information on setting alternate time servers and setting a
synchronization interval for the access point to adjust its displayed time.
Define a primary and alternate WIPS server IP Address for WIPS Server 1 and
2. These are the addresses of the primary and secondary WIPS console server.
WIPS support requires a Motorola AirDefense WIPS Server on the network.
WIPS functionality is not provided by the access point alone. The access point
works in conjunction with the dedicated WIPS server(s).
Settings screen. Refer to
necessary) to set a system location and admin email address for the
access point or to view other default settings.
Radio Configuration
Time Server field. Once the IP address is entered, the
Configuring Network Time Protocol (NTP) on page 4-
Configuring System Settings on page 4-2
field to define how WLAN and WIPS are supported
AP-7131N-FGR Dual Radio SKU
Radio1 WLAN,
Radio 2 WIPS
Radio 1 WIPS,
Radio 2 WLAN
Radio 1 WLAN,
Radio 2 WLAN
Radio 1 WIPS,
Radio 2 WIPS
Radio1 WLAN,
Radio 2 Disabled
System
(if