Motorola AP-7131N-FGR Product Reference Manual page 497

AP7131N>admin(system)>set
Description:
Sets access point system parameters.
Syntax:
set name <name>
loc <loc>
email <email>
cc <code>
admin(system)>set name phils
admin(system)>set loc engineering
admin(system)>set email mudskipper@yahoo.com
admin(system)>set cc us
NOTE This name will appear in the WIPS server when one of the radios is configured as a sensor and the WIPS
functionality connects to the WIPS server. The WIPS module only accepts names with up to 20 characters,
keep that if intending to use this AP as a sensor.
For information on configuring System Settings using the applet (GUI), see
Appendix A for information on the two-character country codes.
Sets the access point system name to <name> (1 to 59 characters). The access
point does not allow intermediate space characters between characters within
the system name. For example, "AP7131N sales" must be changed to
"AP7131Nsales" to be a valid system name.
Sets the access point system location to <loc> (1 to 59 characters).
Sets the access point admin email address to <email> (1 to 59 characters).
Sets the access point country code using two letters <code>.
Configuring System Settings on page
8-159
4-2. Refer to