Motorola AP-7131N-FGR Product Reference Manual page 82

3-14 AP-7131N-FGR Access Point Product Reference Guide
7. Select the
its ESSID and security scheme for basic operation.
NOTE A maximum of 16 WLANs are configurable within the Wireless
a. Enter the Extended Services Set Identification (ESSID) and name associated with the
WLAN. For additional information on creating and editing up to 16 WLANs per access
point, see
b. Use the
the 2.4 or 5 GHz radio band. Ensure the radio selected has been enabled (see step 8).
8. Once the WLAN's radio designations have been made, the radio must be configured in
respect to intended 2.4 or 5 GHz radio traffic and the antennas used. Refer to
Network Configuration
and configure the Radio Settings field (at a minimum). If you know the radio's Properties,
Performance and Beacon Settings, those fields can also be defined at this time.
Define the Channel Settings, Power Level and 802.11 mode in respect to the 2.4 or 5 GHz
802.11b/g/n or 802.11a/n radio traffic and anticipated gain of the antennas.
CAUTION Only a qualified wireless network administrator should set the
!
NOTE Even an access point configured with minimal values must protect its data
9. Click Apply
from the screen without clicking Apply results in all changes to the screens being lost.
WLAN #1 tab (WLANs 1 - 4 are available within the Quick Setup screen) to define
Configuration screen. The limitation of 16 WLANs.
Creating/Editing Individual WLANs on page
Available On checkboxes to define whether the target WLAN is operating in
-> Wireless
access point radio configuration. Refer to
802.11a/n or 802.11b/g/n Radio on page 5-59
understanding of additional radio values and their implications.
against theft and corruption. A security policy should be configured for
WLAN1 as part of the basic configuration outlined in this guide. A security
policy can be configured for the WLAN from within the
screen. Policies can be defined over time and saved to be used as needed
as security requirements change. Motorola recommends you familiarize
yourself with the security options available on the access point before
defining a security policy. Refer to
Settings on page 3-15.
to save any changes to the access point Quick Setup screen. Navigating away
5-32.
-> Radio Configuration
Configuring the
Configuring Basic WLAN Security
-> Radio1 (or Radio2),
for an
Quick Setup