Motorola AP-7131N-FGR Product Reference Manual page 628

9-16 AP-7131N-FGR Access Point Product Reference Guide
5. Select the
connections with other mesh network supported access points radios on the same WLAN.
If the Client Bridge checkbox has been selected, use the
menu to select the WLAN (ESS) the client bridge uses to establish a wireless link. The
default setting, is (WLAN1). Motorola recommends creating (and naming) a WLAN
specifically for mesh networking support to differentiate the Mesh supported WLAN from
non-Mesh supported WLANs. For more information, see
Networking Support on page 9-9
Once the settings within the Radio Configuration screen are applied (for an initial
deployment), the current number of base bridges visible to the radio displays within the
Visible field, and the number of base bridges currently connected to the radio displays
within the
values update in real-time.
NOTE Ensure you have verified the radio configuration for both Radio 1 and
6. Click the
connection links.
Client Bridge checkbox to enable the access point radio to initiate client bridge
BBs Connected field. If this is an existing radio within a mesh network, these
Radio 2 before saving the existing settings and exiting the Radio
Configuration screen.
Advanced button to define a prioritized list of access points to define mesh
Mesh Network Name
Configuring a WLAN for Mesh
drop-down
BBs