Installing The Power Injector; Preparing For Site Installation - Motorola AP-7131N-FGR Product Reference Manual

Hide thumbs Also See for AP-7131N-FGR:

Table of Contents

AP-7131N-FGR Access Point Product Reference Guide

CAUTION The access point supports any standards-based compliant power

2.6.1 Installing the Power Injector

Refer to the following sections for information on planning, installing, and validating the installation:

Cabling the Power Injector

2.6.1.1 Preparing for Site Installation

The Power Injector can be installed free standing, on an even horizontal surface or wall mounted

using the unit's wall mounting key holes. The following guidelines should be adhered to before

cabling the Power Injector to an Ethernet source and access point:

• Do not block or cover airflow to the Power Injector

• Keep the unit away from excessive heat, humidity, vibration and dust.

source (including non-Motorola power sources). However, using the

wrong solution (including a POE system used on a legacy Motorola

access point) could either limit functionality or severely damage the

access point and void the product warranty.