Motorola AP-7131N-FGR Product Reference Manual page 505

AP7131N>admin(system.aap-setup)>set
Description:
Sets access point's Adaptive AP configuration.
Syntax:
set auto-discovery Sets the switch auto-discovery mode (enable/disable).
ipadr Defines the switch IP address used.
name Defines the switch name for DNS lookups (up to 127 characters).
port Sets the port.
passphrase Defines the pass phrase or key for switch connection.
tunnel-to-switch Enables/disables the tunnel between switch and access point.
ac-keepalive Defines the keepalive interval.
load-balancing Enables or disables AAP load balancing.
admin(system.aap-setup)>set auto-discovery enable
admin(system.aap-setup)>set ipadr 192.235.111.10
admin(system.aap-setup)>set port 1812
admin(system.aap-setup)>set passphrase mudskipper
admin(system.aap-setup)>set load-balancing enable
For information on configuring adaptive AP using the applet (GUI), see
For an overview of adaptive AP functionality and its implications, see
Adaptive AP Setup on page
Adaptive AP on page 10-1.
4-11.
8-167