Motorola AP-7131N-FGR Product Reference Manual page 106

4-16 AP-7131N-FGR Access Point Product Reference Guide
2. Use the access point
access point's LAN1, LAN2 or WAN interfaces:
Applet HTTPS (port
443)
CLI SSH2 (port 22)
SNMP (port 161)
3. Refer to the
Access field checkboxes to enable/disable the following on the
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the access point configuration applet using a Secure Sockets
Layer (SSL) for encrypted HTTP sessions.
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the access point CLI using the SSH (Secure Shell) protocol.
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the access point configuration settings from an SNMP-capable
client.
Applet Timeout field to set an HTTPS timeout interval.