Motorola AP-7131N-FGR Product Reference Manual page 343

AP7131N>admin>passwd
Description:
Changes the password for the admin login.
Syntax:
passwd Changes the admin password for access point access. This requires typing the old admin password and entering a
new password and confirming it. Passwords can be between 8 and11 characters. The access point CLI treats the
following as invalid characters:
' " \
In order to avoid problems when using the access point CLI, these characters should be avoided.
Example:
admin>passwd
Old Admin Password:******
New Admin Password (8 - 11 characters):******
Verify Admin Password (8 - 11 characters):******
Password successfully verified
For information on configuring passwords using the applet (GUI), see
& $ ^ * + ? [ ( { | , < >
Setting Passwords on page 6-2.
8-5