Motorola AP-7131N-FGR Product Reference Manual page 87

Remote Subnet Mask Enter the subnet mask for the tunnel's remote network for the
Remote Gateway
4. Select the Auto (IKE) Key Exchange
IKE provides an automatic means of negotiation and authentication for communication
between two or more entities.
5. Configure all the parameters within the
Passphrase must be shared by the external NTP, syslog or Radius resource.
6. From back within the VPN screen, select the
Auto Key Settings
Use the Auto Key Settings
with the tunnel.
7. Configure all the parameters within the
For additional information on configuring either IKE Settings or Auto Key Settings, see
Configuring Auto Key Settings on page 6-33
8. Click Apply to save the configuration of the new tunnel.
External NTP, syslog and Radius resources are now reachable from the access point's secure
VPN tunnel. However, you must supply the access point with the IP address of the NTP,
syslog or Radius server for the access point to connect to those external resources. For
information on configuring external NTP, syslog and Radius server support, see
Network Time Protocol (NTP) on page
Configuring User Authentication on page
tunnel. The remote subnet mask is the subnet setting for the
remote network the tunnel connects to.
Enter a numerical (non-DNS) remote gateway IP address for the
tunnel. The remote gateway IP address is the gateway address
on the remote network the VPN tunnel connects to.
checkbox and the
IKE Settings
button.
screen to specify the type of encryption and authentication used
Auto Key Settings
4-44,
6-54.
IKE Settings
screen.The IKE Authentication
Auto (IKE) Key Exchange
screen.
and Configuring IKE Key Settings on page
Logging Configuration on page 4-48
Getting Started 3-19
button.
checkbox and the
6-36. .
Configuring
or