2. From within the
Data Source Configuration
to select the data source for the Radius server.
Local
LDAP
NOTE When using LDAP, only PEAP-GTC and TTLS/PAP are supported.
An internal user database serves as the data source. Use the
Database
screen to enter the user data. For more information, see
Managing the Local User Database on page
If LDAP is selected, the switch will use the data in an LDAP server.
Configure the LDAP server settings on the LDAP screen under
Radius Server on the menu tree. For more information, see
Configuring LDAP Authentication on page
Configuring Access Point Security
field, use the
Data Source
6-63.
6-58.
6-55
drop-down menu
User