Motorola AP-7131N-FGR Product Reference Manual page 226

5-78 AP-7131N-FGR Access Point Product Reference Guide
NOTE With IP Filtering, users can only define a destination port, not a source
2. Click the
(or filtering rule) attributes require definition.
Filter name
Protocol
Port Start
Port End
Src Start
Src End
Dst Start
Dst End
port.
Add button to define the attributes of a new IP Filtering policy. The following policy
Create a name for the filter policy unique to its function in order to
differentiate it from others that may have somewhat similar
configurations.
Specify the protocol used for the filter policy. The options are ALL,
TCP, UDP, ICMP, PIM, GRE, RSVP, IDP, PUP, EGP, IPIP, ESP, AH, IGMP,
IPVG, COMPR_H and RAW_IP. The protocol number can also be
used as the protocol name. This allows the use or protocols that are
not within the drop-down menu.
Defines the socket number (or port) number representing the
beginning protocol port range either allowed or denied permission
to the target LAN1, LAN2 or WLAN.
Defines the socket number (or port) number representing the
ending protocol port range either allowed or denied permission to
the target LAN1, LAN2 or WLAN.
Creates a range beginning source IP address to be either allowed
or denied IP packet forwarding. The source address is where the
packet originated. Setting the Src End value the same as the Src
Start allows or denies just this address without defining a range.
Providing this address completes a range of source (data
origination) addresses than can either be allowed or denied access
to the LAN1, LAN2 or WLAN.
Creates a range beginning destination IP address to be either
allowed or denied IP packet forwarding. Setting the Dst End value
the same as the Dst Start allows or denies just this address without
defining a range.
Providing this address completes a range of destination addresses
than can either be allowed or denied access to the LAN1, LAN2 or
WLAN.