Motorola AP-7131N-FGR Product Reference Manual page 220

5-72 AP-7131N-FGR Access Point Product Reference Guide
2. Refer to the access point
The access point Router Table field displays a list of connected routes between an enabled
subnet and the router. These routes can be changed by modifying the IP address and subnet
masks of the enabled subnets.
The information in the access point Router Table is dynamically generated from settings
applied on the
mask (or network mask) and gateway settings are those belonging to each subnet. Displayed
interfaces are those associated with destination IP addresses. To change any of the network
address information within the WAN screen, see
3. From the
LANs (if enabled) to server as the default gateway to forward data packets from one network
to another.
4. To set or view the RIP configuration, click the
Routing Information Protocol (RIP) is an interior gateway protocol that specifies how routers
exchange routing-table information. The Router screen also allows the administrator to
Router Table
WAN screen. The destination for each subnet is its IP address. The subnet
Use Default Gateway
field to view existing routes.
Configuring WAN Settings on page
drop-down menu, select the WAN or either of the two
RIP Configuration
5-17.
button.