Motorola AP-7131N-FGR Product Reference Manual page 329

Hide thumbs Also See for AP-7131N-FGR:
Table of Contents

Advertisement

Throughput
Avg. Bit Speed
% of Non-unicast pkts Displays the percentage of the total packets for the selected
6. Refer to the
RF Status
Avg MU Signal
Avg MU Noise
Avg MU SNR
7. Refer to the
Errors
transmitted.
The
Total
column displays the average total packets per second
crossing the selected MU. The
total packets per second received on the MU. The
displays the average total packets per second sent on the MU. The
number in black represents throughput for the last 30 seconds, the
number in blue represents throughput for the last hour.
The
Total
column displays the average bit speed in Mbps for a
given time period on the MU. This includes all packets sent and
received. The number in black represents average bit speed for the
last 30 seconds and the number in blue represents average bit
speed for the last hour. Consider increasing the data rate of the AP
if the current bit speed does not meet network requirements. For
more information, see
Radio on page
5-59. The associated MU must also be set to the
higher rate to interoperate with the
mobile unit that are non-unicast. Non-unicast packets include
broadcast and multicast packets. The number in black represents
packets for the last 30 seconds and the number in blue represents
packets for the last hour.
field to view MU signal and signal disturbance information.
Displays RF signal strength in dBm for the target MU. The number
in black represents signal information for the last 30 seconds and
the number in blue represents signal information for the last hour.
Displays RF noise for the target MU. The number in black
represents noise for the last 30 seconds, the number in blue
represents noise for the last hour.
Displays the Signal to Noise Ratio (SNR) for the target MU. The
Signal to Noise Ratio is an indication of overall RF performance on
your wireless network.
field to view MU retry information and statistics on packets not
Rx
column displays the average
Configuring the 802.11a/n or 802.11b/g/n
access point
Monitoring Statistics
Tx
column
at that data rate.
7-29

Advertisement

Table of Contents
loading

Table of Contents