Motorola AP-7131N-FGR Product Reference Manual page 485

AP7131N>admin(network.firewall)> set
Description:
Defines the access point firewall parameters.
Syntax:
set mode <mode>
nat-timeout <interval>
syn <mode>
src <mode>
win <mode>
ftp <mode>
ip <mode>
seq <mode>
mime filter
len <length>
hdr <count>
Example:
admin(network.firewall)>set mode enable
admin(network.firewall)>set ftp enable
admin(network.firewall)>set ip enable
admin(network.firewall)>set seq enable
admin(network.firewall)>set src enable
admin(network.firewall)>set syn enable
admin(network.firewall)>set win enable
admin(network.firewall)>show
Firewall Status
Override LAN to WAN Access
Configurable Firewall Filters
ftp bounce attack filter
syn flood attack filter
unaligned ip timestamp filter
source routing attack filter
winnuke attack filter
seq num prediction attack filter
mime flood attack filter
max mime header length
max mime headers
Enables or disables the firewall.
Defines the NAT timeout value.
Enables or disables SYN flood attack check.
Enables or disables source routing check.
Enables or disables Winnuke attack check.
Enables or disables FTP bounce attack check.
Enables or disables IP unaligned timestamp check.
Enables or disables sequence number prediction check.
Enables or disables MIME flood attack check.
Sets the max header length in bytes as specified by <length>
(with value in range 256 - 34463).
Sets the max number of headers as specified in <count>
(with value in range 12 - 34463).
: enable
: disable
: enable
: enable
: enable
: enable
: enable
: enable
: enable
: 8192
: 16
8-147