Motorola AP-7131N-FGR Product Reference Manual page 146

4-56 AP-7131N-FGR Access Point Product Reference Guide
CAUTION If using a Linux server configured to support the BootP "bf" option, an
!
If updating the access point manually, configure the
to set a filename and target firmware file upload location for firmware updates.
3. Specify the name of the target firmware file within the
4. If the target firmware file resides within a directory, specify a complete path for the file
within the
5. Enter an IP address for the SFTP server used for the update. Only numerical IP address names
are supported, no DNS can be used.
6. Set the username for the SFTP server login.
NOTE Click
7. Click the
update, the AP reboots and completes the update.
NOTE The access point must complete the reboot process to successfully update
8. Confirm the access point configuration is the same as it was before the firmware update. If
they are not, restore the settings. Refer to
for instructions on exporting the configuration back to the access point.
9. Click Apply
screen. The Apply button does not execute the firmware, only saves the update settings
entered.
10. Click Undo Changes
settings displayed on Firmware Update screen to the last saved configuration.
automatic firmware update is not be triggered unless both the
Automatic Firmware Update
Configuration Update
Update option is disabled, the access point will not download the
configuration file. Without the configuration file, the access point
cannot parse for the firmware file name required to trigger the
firmware update.
Filepath(optional)
Apply to save the settings before performing the firmware update.
The user is not able to navigate the access point user interface while the
firmware update is in process.
Perform Update button to initiate the update. Upon confirming the firmware
the device firmware, regardless of whether the reboot is conducted using
the GUI or CLI interfaces.
to save the filename and filepath information entered into the Firmware Update
(if necessary) to undo any changes made. Undo Changes reverts the
and
options are selected. If the Configuration
Update Firmware
field.
Importing/Exporting Configurations on page 4-50
Enable Automatic
fields as required
Filename field.
Enable