Creating A Vpn Tunnel Between Two Access Points - Motorola AP-7131N-FGR Product Reference Manual

Auto Key Settings
IKE Settings
4. Click Apply to save any changes to the
Key Settings, IKE Settings and Manual Key Settings screens. Navigating away from the
screen without clicking the Apply button results in all changes to the screens being lost.
5. Click Undo Changes
settings displayed on the VPN, Auto Key Settings, IKE Settings and Manual Key Settings
screens to the last saved configuration.
6. Click Logout
logout before the applet is closed.

6.7.1 Creating a VPN Tunnel between Two Access Points

This section describes how to define a simple configuration using two access points to create an
IPSec tunnel.
To create a IPSec VPN tunnel between two access points:
Select the Auto (IKE) Key Exchange checkbox, and click the
Key Settings button to open a screen where AH authentication
and ESP encryption/authentication can be configured. For more
information, see
After selecting Auto (IKE) Key Exchange, click the
button to open a screen where IKE specific settings can be
configured. For more information, see
on page 6-36.
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
Configuring Auto Key Settings on page
Configuring IKE Key Settings
VPN screen as well as changes made to the Auto
Configuring Access Point Security
Auto
6-33.
IKE Settings
6-27