Configuring Port Forwarding - Motorola AP-7131N-FGR Product Reference Manual

Outbound Mappings
Inbound Mappings
Port Forwarding
3. Click Apply to save any changes to the NAT screen. Navigating away from the screen
without clicking the Apply button results in all changes to the screens being lost.
4. Click Undo Changes
settings displayed on the NAT screen to the last saved configuration.
5. Click Logout
logout before the applet is closed.

5.2.1.1 Configuring Port Forwarding

Use the Port Forwarding
the associated WAN IP address.
To configure port forwarding for the access point:
1. Select Network Configuration
2. Select 1 to 1
3. Click on the Port Forwarding
When 1 to 1 NAT is selected, a single IP address can be entered in
the Outbound Mappings
mapping of the WAN IP address to the specified IP address.
When 1 to Many
Mappings area displays a
button to select the LAN1 or LAN2 IP address used to set the
outbound IP address or select
If none is selected as the NAT Type, The Outbound Mappings area
is blank.
When 1 to 1 or
option displays a
Click the Port Forwarding
forwarding parameters for inbound traffic from the associated
WAN IP address. for information on configuring port forwarding,
see Configuring Port Forwarding on page
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
screen to configure port forwarding parameters for inbound traffic from
->
or 1 to Many from the NAT Type drop-down menu.
button within the
area. This address provides a 1 to 1
is selected as the NAT Type, the Outbound
1 to Many Mappings
none to exclude the IP address.
1 to Many is selected, the
Port Forwarding button.
button to display a screen of port
WAN -> NAT from the access point menu tree.
Inbound Mappings
Network Management
button. Click the
Inbound Mappings
5-25.
area.
5-25