Motorola AP-7131N-FGR Product Reference Manual page 174

5-26 AP-7131N-FGR Access Point Product Reference Guide
4. Configure the
Add
Delete
Name
Transport
Start Port and End Port Enter the port or ports used by the port forwarding service. To
Port Forwarding screen to modify the following:
Click Add to create a local map that includes the name, transport
protocol, start port, end port, IP address and Translation Port for
incoming packets.
Click Delete to remove a selected local map entry.
Enter a name for the service being forwarded. The name can be any
alphanumeric string and is used for identification of the service.
Use the Transport
protocol used in this service. The choices are ALL, TCP, UDP, ICMP,
AH, ESP, and GRE.
specify a single port, enter the port number in the
To specify a range of ports, use both the
options to enter the port numbers. For example, enter 110 in the
Start Port field and 115 in the End Port field.
pull-down menu to specify the transport
Start Port
Start Port area.
and End Port