Configuring An Ipsec Tunnel And Vpn Faqs; Configuring A Vpn Tunnel Between Two Access Points - Motorola AP-7131 Product Reference Manual

Hide thumbs Also See for AP-7131:

Table of Contents

AP-7131 Access Point Product Reference Guide

B.2 Configuring an IPSEC Tunnel and VPN FAQs

The access point has the capability to create a tunnel between an access point and a VPN endpoint.

The access point can also create a tunnel from one access point to another access point.

The following instruction assumes the reader is familiar with basic IPSEC and VPN terminology and

Configuring a Cisco VPN Device

Frequently Asked VPN Questions

B.2.1 Configuring a VPN Tunnel Between Two Access Points

The access point can connect to a non-AP device supporting IPSec, such as a Cisco VPN device -

labeled as "Device #2".

For this usage scenario, the following components are required:

• 2 access points (either a Motorola AP-7131, AP-5131 or AP-5181 model access point)

• 1 PC on each side of the access point's LAN.

To configure a VPN tunnel between two access points:

1. Ensure the WAN ports are connected via the internet.

2. On access point #1, select

4. Enter a tunnel name (tunnel names do not need to match).

to add the tunnel to the list.

from the main menu tree.