M Connection Type - Icom VE-PG3 Instruction Manual

5
BRIDGE MODE SETTING SCREEN
5. [Router] Menu (continued)

M Connection Type

Select the WAN connection type.
Connection Type ............... Select the WAN connection type as specified by your ISP.
No Connection
Select this when the WAN port is not connected to the network.
The VE-PG3 is not connected to the network, even if the WAN port is
physically connected to a network port.
Note: PPPoE and IPv6 bridge communications also cannot be used.
DHCP Client
The WAN IP address is automatically obtained by a DHCP server.
Static IP
The WAN IP address is specified by your ISP.
PPPoE
The WAN IP address is specified by your ISP in the PPPoE method.
5-21
[Router]–[WAN]
(Default: No Connection)