V/Roip] Menu; M Pstn - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN

7. [V/RoIP] Menu

M PSTN

Configure the details to connect to the PSTN (Public Switched Telephone Network).
q RX Volume ..................
w TX Volume ..................
e Echo Canceller ...............
r Optimization Status .........
t Optimization ..................
y Echo Suppression .........
u Echo Suppression Level ...
i CNG Signal ..................
o CNG Signal Level .........
!0 Contract Line Number ......
Select the telephone receive audio volume level.
Select the telephone transmit audio volume level.
Select an echo cancelling option.
When "Enable (Manual optimization)" or "Enable (Booting optimization)" is
selected, the echo heard by the party is reduced.
Displays the optimization status; "Not optimised," "During optimization" or
"Optimization failure."
If you select other than "Disable" in the [Optimization Status] item, click
<Start> to proceed the Echo Canceller optimization.
Select "Enable" to reduce the echo.
This function automatically adjusts the receive audio volume according to the
transmit audio level, to reduce the echo.
Select the echo suppress level.
When received audio is discontinuous, decrease this value.
Note: Too low value increases the echo.
Select "Enable" to use CNG (Comfort Noise Generator) function.
This function intentionally applies the white noise to the received audio to
reduces the uncomfortableness during audio absence.
If you use the CNG function, select the noise level to apply.
Enter the contract line number.
6-21
[V/RoIP]–[LINE1/2]
(Default: Enable (Booting Optimization))
(Default: Enable)
(Default: Enable)
(Default: 0)
(Default: 0)
(Default: –30)
(Default: –52)