M Bridge Communication - Icom VE-PG3 Instruction Manual

5
BRIDGE MODE SETTING SCREEN
8. [Port Settings] Menu (continued)

M Bridge Communication

Set the details of the input audio from the [EXT1]/[EXT2] port.
*
*Appears when "Enable" is selected in [Default Callee ID].
q Encryption .....................
Default Callee ID
w Default Callee ID ............
e Call Type .....................
r Destination Prefix ID ......
t Destination ID ...............
y My Station Prefix ID .........
u My Station ID ...............
[Port Settings]–[EXT Input 1 (EXT1)/EXT Input 2 (EXT2)]
Select "Enable" to encrypt the communication.
• When you select "Enable," enter the appropriate key to [ Encryption Key].
Select "Enable" to apply the ID to the TX signal.
• When you select "Enable," enter the IDs in the below items.
Select the type of call.
• Individual: Call only specified radio.
• Group: Call all radios that belong to the specified group.
• All:
Call all radios.
Enter the destination prefix ID.
ID range: (Depending on the system mode)
Enter the destination ID.
ID range: (Depending on the system mode)
Enter the station prefix ID.
ID range: (Depending on the system mode)
Enter the station ID.
ID range: (Depending on the system mode)
5-88
(Default: Disable)
(Default: Disable)
(Default: Group)
(Default: 1)
(Default: 1)