M Controller Connection - Icom VE-PG3 Instruction Manual

5
BRIDGE MODE SETTING SCREEN
8. [Port Settings] Menu (continued)

M Controller Connection

Configure the connection to IP1000C.
r
q Controller Address .........
w Controller Port Number ...
e Local Port Number .........
r Connection Status .........
Radio A
Radio A1
Enter the IP1000C's IP address.
Enter the service port number which is set in the [Service Port Number] item
on the [Additional Controller Settings] screen of the IP1000C.
Range: "2" to "65534" (only even numbers)
Enter the destination IP1000C's service port number which is set in the
[Destination Port Number] item on the [Additional Controller Link] screen of
the IP1000C.
Range: "2" to "65534" (only even numbers)
Displays the connection status.
VE-PG3
IP
Network
An example of communicating using IP1000C
5-102
[Port Settings]–[Controller 1–Controller 4]
(Default: 32010 (Controller 1)
IP1000C
Wireless access point
(Default: 32000)
32012 (Controller 2)
32014 (Controller 3)
32016 (Controller 4))
IP100H