5
BRIDGE MODE SETTING SCREEN
9. [Expansion] Menu (continued)
M Emergency Notice
Select the port to use as the emergency notice output.
t
q Transceiver 1 (TRX1)
Transceiver 2 (TRX2) ......
w Digital Transceiver 1 (D-TRX1) –
Digital Transceiver 4 (D-TRX4)
.................................
e EXT I/O 1 (EXT1)
EXT Output 2 (EXT2) ......
r Controller 1 –
Controller 4 ..................
t Emergency Notice Equipment
If you select "Enable," the emergency notice is sent to the port ([TRX1]/
[TRX2]).
If you select "Enable," the emergency notice is sent to the port ([D-TRX1] to
[D-TRX4]).
• One CT-24 is necessary for each D-TRX port to notice.
If you select "Enable," the emergency notice is sent to the connected
transceiver or external device.
If you select "Enable," the emergency notice is sent to the IP1000C.
If you select "Enable," the emergency notice is sent to the specified Bridge
connect destination.
• Select "Emergency" in [Input Connection Port] on the [EXT Input 1 (EXT1)]/
[EXT Input 2 (EXT2)] (Or EXT I/O1/2) screen.
5-108
[Expansion]–[Abnormal Condition Monitoring]
(Default: Disable)
(Default: Disable)
(Default: Disable)
(Default: Disable)
(Default: Disable)