5
BRIDGE MODE SETTING SCREEN
10. [Management] Menu (continued)
M NTP
Set the date and time automatically. See the "Maintenance" section for details.
• To use this function, an internet connection, DNS and default gateway settings are necessary.
q NTP Client .....................
w NTP Server 1 ..................
e NTP Server 2 ..................
r Polling Interval ..................
t Last Update .....................
y Next Update .....................
u <Apply> ...........................
Select "Enable" to turn ON the Automatic Clock Synchronize function.
The Automatic Clock Synchronize function automatically synchronizes the
internal clock with the time management server (NTP).
Enter the IP address of the time management server (NTP).
Enter the IP address of the time management server (NTP) other than above.
If there is no response from the above IP address, the VE-PG3 accesses this
one.
Enter the period to access the time management server (NTP).
Range: 1 to 99 (day)
Displays the day of the VE-PG3's last-access to the time management server.
Displays the day of the VE-PG3's accesses to the time management server
next.
Select "Enable" in "NTP Client," and then click to access the NTP server and
synchronize the internal clock with the server.
5-113
[Management]–[Date and Time]
u
(Default: Enable)
(Default: 210.173.160.27)
(Default: 210.173.160.57)
(Default: 1)