M Voice Reception Control From The Transceiver - Icom VE-PG3 Instruction Manual

5
BRIDGE MODE SETTING SCREEN
8. [Port Settings] Menu (continued)

M Voice Reception Control from the Transceiver

The VOX (voice operated transmission) function automatically switches the connected transceiver to transmit,
when the VE-PG3 receives an audio signal through the network.
Audio Detection Methods from the Transceiver: VOX
Audio Detection Methods from the Transceiver: SQL
Audio Detection Methods from the Transceiver: Always Receive
q Attack Time ..................
w Release Time ...............
e Voice Delay ..................
r Voice Threshold ............
Audio Detection Methods from the Transceiver: SQL
t Ignore Time ..................
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
Enter the RX delay time in 5 milliseconds step.
Range: 5 to 500 milliseconds
It is the delay time period before the VE-PG3 to output the audio signal to the port.
Select the RX delay time in 5 milliseconds step.
Range: 5 to 2000 milliseconds
The delay time for the VE-PG3 to output the control signal to the network
which informs that the audio signal is no longer received.
Set the audio signal buffer time to prevent intermittent audio in 5 milliseconds
step.
Range: 0 to 500 milliseconds
Set the voice threshold level.
Range: 0 to 100 %
The audio signal is output to the network according to this threshold level.
Set the amount of time to ignore the received audio signal.
Range: 0 to 2000 (milliseconds)
The VE-PG3 ignores the audio signal received within the Ignore Time.
5-75
(Default: 50)
(Default: 200)
(Default: 5)
(Default: 40)
(Default: 300)