Icom VE-PG3 Instruction Manual page 149

5
BRIDGE MODE SETTING SCREEN
8. [Port Settings] Menu (continued)
M Digital Transceiver Communication
Set the calling details.
q Talk-Back .....................
w Digital SQL ..................
e RX All Call .....................
Default Callee ID
r Call Type .....................
t Destination ID ...............
M Digital Transceiver Control
Set the calling details.
Release Time ..................
Mode: dPMR Mode2
Select "Enable" to enable the Talk-Back.
• When you select "Enable," select the Talk-Back Time between 1 and 10
(seconds).
Select "Enable" to enable the digital squelch.
Select "Enable" to permit all talkgoups to receive the call.
Select the type of call.
• Individual:
Call only specified radio.
• Group:
Call all radios that belong to the specified group.
• All:
Call all radios.
Enter the destination ID.
ID range: (Depending on the system mode)
Mode: dPMR Mode2
Select the RX delay time in 100 milliseconds step.
Range: 200 to 1000 milliseconds
It is the delay time for the VOX switch to turn OFF after no audio signal is
received.
5-87
[Port Settings]–[Digital Transceiver 1 (D-TRX1)]–
[Digital Transceiver 4 (D-TRX4)]
(Default: Enable, 5 (seconds))
(Default: Disable)
(Default: Disable)
(Default: Group)
(Default: 100000)
(Default: 200)