5
BRIDGE MODE SETTING SCREEN
10. [Management] Menu (continued)
M SYSLOG
Select the information displayed on the SYSLOG screen.
q DEBUG ........................
w INFO ..............................
e NOTICE ...........................
r Host IP Address ...............
Select whether to enable or disable to display the debug information on the
SYSLOG screen.
ISelect whether to enable or disable to display the information messages on
the SYSLOG screen.
Select whether to enable or disable to display the notice messages on the
SYSLOG screen.
If you use the SYSLOG function, enter the IP address of the host that receives
the SYSLOG messages.
5-114
[Management]–[SYSLOG]
(Default: Disable)
(Default: Enable)
(Default: Enable)