Loading The Settings From The Usb Flash Drive - Icom VE-PG3 Instruction Manual

7
MAINTENANCE
8. How to restore the configuration using a USB flash drive (continued)

Loading the settings from the USB flash drive

1
Remove the USB flash drive from the PC appropriately.
2
Prepare the VE-PG3 to load the settings.
3
Turn OFF the power.
NOTE: Turn OFF the VE-PG3's power, before inserting the USB flash drive.
4
Insert the USB flash drive, which contains the setting
data (savedata.sav), to the [USB] port, and then turn
ON the power.
• While accessing the USB flash drive, [PWR/MSG]
blinks.
NEVER remove the USB flash drive, or turn
NOTE:
OFF the VE-PG3's power while transferring
data. It will cause data corruption, or damage
the USB flash drive.
5
When all the data has been loaded into, the [PWR/MSG]
LED is blackout and the VE-PG3 automatically restarts.
Verify that the [PWR/MSG]LED lights Green, then turn
OFF the power.
Then remove the USB flash drive from the VE-PG3.
• Turn OFF the VE-PG3's power before inserting or removing
the USB flash drive, to prevent data corruption.
• When importing setting data from the USB flash drive to
the VE-PG3, the originally programmed setting data is
automatically saved as "bakdata.sav" in the USB flash
drive, as a backup.
w
7-13
w
Power ON
q
Insert the USB memory
q Power OFF
Remove the USB memory