Icom VE-PG3 Instruction Manual page 324

6
CONVERTER MODE SETTING SCREEN
10. [Expansion] Menu
M Abnormal Condition Monitoring (continued)
• This is an example.
eSIP Server Registration ... Select "Enable" to detect the Connection failure (1 entry or more).
When a Connection failure is detected, the error report is displayed on the
[SYSLOG] screen in the [Information] Menu.
Control Output
Select "Enable" to output the error detect signal from the B1/B2 terminal
(+/–).
• Select "Relay circuit" in the Control Circuit] item on the [EXT Output] (1/2),
or [EXT I/O] (1/2) screen.
While the error detect signal is sent, the VE-PG3 cannot receive signals
from the external device that is connected to the B1/B2terminal (+/–).
6-138
[Expansion]–[Abnormal Condition Monitoring]
(Default: Disable)
(Default: Disable)