Icom VE-PG3 Instruction Manual page 3

INTRODUCTION
For USA
1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
back of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
2. The following USOC jacks may be used with this equipment: RJ11C.
3. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug
is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
4. The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone company. For products approved
after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
5. If the equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required.
But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe it is necessary.
6. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect
the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you
to make the necessary modifications to maintain uninterrupted service.
If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect
the equipment until the problem is resolved.
8. This equipment contains no user serviceable parts. Please contact to
Company Name: Icom America Inc.
Address: 2380 116th Ave NE Bellevue, WA 98004
Phone: (800) 426-7983
9. This equipment cannot be used on public coin service provided by the telephone company. Connection to Party
Line Service is subject to state tariffs. Contact the state Public Utility Commission, Public Service Commission, or
Corporate Commission for information.
10. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this
MFP does not disable your alarm equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or a qualified installer. FCC Telephone Consumer Protection Act The Telephone
Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device,
including FAX machines, to send any message unless such message clearly contains in a margin at the top
or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an
identification of the business or other entity, or other individual sending the message, and the telephone number of
the sending machine or such business, other entity, or individual. The telephone number provided may not be a 900
number or any other number for which charges exceed local or long distance transmission charges.
To comply with this law, you must enter the following information in your fax unit:
• Date and time: see the Installation section of this document for instructions on doing this.
• Name and telephone number which identify the source of your fax transmission: see the User's Handbook f for
instructions on doing this.
ii