M Usb - Icom VE-PG3 Instruction Manual

5
BRIDGE MODE SETTING SCREEN
10. [Management] Menu (continued)

M USB

Select the option. to use USB flash device.
q USB Flash Drive ............
w USB Access Permission ......
Select "Enable" if you use the Automatic firmware update function or
Automatic Setting Load function.
• See the "Maintenance" section for details.
Select the access permit option.
• Firmware Update
Enter the check mark to enable the firmware update using a USB memory.
• Backup/Restore Configuration
Enter the check mark to enable the Backup/Restore settings using a USB
memory.
• Load Custom Hold Music
Enter the check mark to automatically load a hold music audio file (.wav)
from the inserted USB flash device.
Note: The maximum duration of audio file is a minute.
5-116
[Management]–[USB]
(Default: Firmware Update
Backup/Restore Configuration
Load Custom Hold Music)
(Default: Enable)