M Selcall In Bridge Connection - Icom VE-PG3 Instruction Manual

5
BRIDGE MODE SETTING SCREEN
7. [Bridge Connection] Menu (continued)

M SelCall in Bridge Connection

Configure the rule of individual Callee destination in the Bridge mode.
The communication route is connected according to this setting.
q Index ...........................
w Name ...........................
e Call Type .....................
r Prefix ID ........................
t Destination ID ...............
Destination SelCall in Bridge Connection
y Address ........................
u Port Number ..................
i<Add> ........................
The index assigned for the entry.
Setting range: "1" to "1000"
You can name the setting. (Up to 31 characters)
Select the type of call.
• Individual : Call only specified radio.
• Group : Call all radios that belong to the specified group.
• All : Call all radios.
Enter the prefix ID of the SelCall destination.
ID range: (Depending on the system mode)
Enter the ID of the SelCall destination.
ID range: (Depending on the system mode)
Enter the VE-PG3's IP address which is connected to the radio that
communicates with the SelCall destination.
Enter the VE-PG3's port number which is connected to the radio that
communicates with the SelCall destination.
Click to add a SelCall rule to the [SelCall in Bridge Connection List].
5-59
[Bridge Connection]–[SelCall in Bridge Connection]