M Emergency Notice - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
10. [Expansion] Menu (continued)

M Emergency Notice

Select the port to use as the emergency notice output.
You can send an emergency notice to a device connected to the VE-PG3.
t
q Transceiver 1 (TRX1)
Transceiver 2 (TRX2) ......
w Digital Transceiver 1 (D-TRX1) –
Digital Transceiver 4 (D-TRX4)
.................................
e EXT Output 1 (EXT1)
EXT Output 2 (EXT2) ......
rEmergency Notice Equipment
t Bridge 1 – Bridge 4 .........
If you select "Enable," the emergency notice is sent to the port ([TRX1]/
[TRX2]).
If you select "Enable," the emergency notice is sent to the port ([D-TRX1] to
[D-TRX4]).
If you select "Enable," the emergency notice is sent to the connected
transceiver or external device.
If you select "Enable," the emergency notice is sent to the specified Bridge
connect destination.
• Select "Emergency" in [Input Connection Port] on the [EXT Input 1 (EXT1)]/
[EXT Input 2 (EXT2)] (Or EXT I/O1/2) screen.
Select a device connected to the VE-PG3 to send an emergency notice
(Bridge 1–4).
6-131
[Expansion]–[Emergency Notice]
(Default: Disable)
(Default: Disable)
(Default: Disable)
(Default: Disable)
(Default: Disable)