Ve-Pg3 Configuration - Icom VE-PG3 Instruction Manual

2
BRIDGE MODE APPLICATION
4. Operating in the NXDN Conventional mode (continued)

2. VE-PG3 configuration

Access the VE-PG3 setting screen, and set the items as shown below.
Menu Item Setting Screen
Bridge
Bridge Connection Point
Connection
SelCall in Bridge Connection SelCall in Bridge Connection Radio B1
Port Settings Transceiver 1 (TRX1)
Digital Transceiver 1 (D-TRX1) Transceiver Model
Digital Transceiver 2 (D-TRX2) Transceiver Model
• After the configuration, click [Connection] to connect to the network.
Setting Item Item Name
Bridge Connection Point Port Type
(TRX1) Connection IP Address
Connection Port Number 21502
Voice Codec
(D-TRX1) Port Type
SelCall in Bridge
Connection
Voice Codec
(D-TRX2) Port Type
SelCall in Bridge
Connection
Voice Codec
List of Bridge Connection
Connection Status
Point Entries
Radio B2
Radio C1
Radio C2
Radio A1
Transceiver Model Transceiver Model
Mode:
Repeater Address
TCP Port Number
UDP Port Number
Connect Key
Unit ID
Mode:
Repeater Address
TCP Port Number
UDP Port Number
Connect Key
Unit ID
2-12
Value
Transceiver 1(TRX1)
192.168.0.2 (VE-PG3's IP address)
(VE-PG3's unused port)
AMBE+2
Digital Transceiver 1 (D-TRX1)
Enable
AMBE+2
Digital Transceiver 2 (D-TRX2)
Enable
AMBE+2
During transmit
Destination ID 1/192.168.0.2 /21504
Destination ID 2/192.168.0.2 /21504
Destination ID 3/192.168.0.2 /21506
Destination ID 4/192.168.0.2 /21506
Destination ID 8/192.168.0.2 /21500
IC-F5060/F6060
NXDN Conventional
UC-FR5000's IP address
Connection: Receive port No. (ex. 41200)
Data: Receive port No. (ex. 41220)
UR-FR5000's key code
Unit ID (ex. 10)
NXDN Conventional
UC-FR5000's IP address
Connection: Receive port No. (ex. 41200)
Data: Receive port No. (ex. 41220)
UC-FR5000's key code
Unit ID (ex. 20)