M Rear Panel - Icom VE-PG3 Instruction Manual

1
BEFORE USING THE VE-PG3
Panel description (continued)

M Rear panel

q [TRX](1/2) port ...............
w [EXT](1/2) port ...............
e [PHONE] port ...............
r [LINE](1/2) ports ............
t [WAN] port .....................
y [LAN] port .....................
u DC jack ........................
i Ground terminal ............
ABOUT THE OPTIONAL CONNECTION CABLE
Before connecting cables, see the cable's manual and the
sticker on the bottom of the VE-PG3 for port information.
• Verify that both the VE-PG3 and connected devices are
turned OFF when connecting or disconnecting the cable.
• Hold the connector body when connecting or disconnecting
them.
• When other cables are connected, you can use needle-nose
pliers to carefully insert or remove connectors.
• Never bend or pinch the cable.
• Never place a heavy object on the cable.
• Never touch the cable with wet hands.
• Always connect the cable correctly. An incorrect connection
could damage the VE-PG3 and/or the transceiver.
q w
Connect the transceiver through the optional cable.
Connect the external equipment through the optional cable.
Connect a telephone.
Connect to the PSTN.
Connect the network terminal device.
• The router function is disabled as the default setting.
Configure the network setting (DHCP Client/Static IP/PPPoE) according to
your network service provider.
Connect the network device such as a HUB.
Connect the supplied AC adaptor.
Connect the ground wire.
PHONE LINE2 LINE1
e r t y u i
VE-PG3 bottom view
1-5
Port information on the sticker
Sticker
Connection cable optional