M Transceiver Control - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu (continued)
Transceiver Control
M
Configure the details for [TRX1]/[TRX2] port.
**
*
*
!5
!6
* Appears only when "DTMF" is selected in [PTT Control Type from the Telephone].
** Appears only when "IC-FR5000/FR6000" or "General" is selected in [Transceiver Model].
q Priority Receive Mode ......
w PTT Cancel Mode .........
e Call Back RX to TX .........
r TX Volume ..................
Select "Enable" to restrict transmission while receiving an RF signal, even if
the transceiver detects audio signal from the SIP phone.
• When "Enable" is selected, the transceiver transmits only when receiving no
RF signal.
Select "Enable" to abort the calling to an IP phone when a transmit request is
detected.
Select "Enable" to mix the audio from the repeater with the audio from the
telephone.
Note: When "Enable" is selected, select "Disable" in [Priority Receive].
P 0 P 1
P 2
P 3 P 4
Repeater
"1, 2, 3"
"1, 2, 3"
"4, 5, 6"
Radio A1
An example of communication with the Call Back RX to TX function
Adjust the VE-PG3's transmitting audio level that is sent to the connected
transceiver between "+6" and "–12" (dB).
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
"1, 2, 3"
[TRX1]
VE-PG3
"1, 2, 3" + "4, 5, 6"
+
Radio A2
6-72
(Default: Disable)
(Default: Disable)
(Default: Disable)
"1, 2, 3"
[LINE1/2]
PSTN
"4, 5, 6"
Analog Telephone
(Default: 0)