M Peer To Peer Common Setting; M Peer To Peer - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
7. [V/RoIP] Menu (continued)

M Peer to Peer Common Setting

Calling from the WAN .........

M Peer to Peer

q Index ...........................
w SIP URI ........................
Select "Allow" to permit to receive the Peer to Peer call from WAN side.
Note: When you select "Allow," you have to enter the destination SIP URI to
the SIP URI item on the "VoIP Phonebook" screen.
Enter the index assigned for the entry.
Setting range:"1" to "100"
Enter the SIP URI up to 63 characters in either format below.
• sip: [SIP username]@[VE-PG3 IP address]
• sip: [SIP username]@[Host name.domain name]
About the [SIP username] part:
Enter an alphabet or number in the [SIP username].
• Use at least one alphabet.
About the [Host name.domain name] part:
• When the VE-PG3 IP address is registered in your party's Phonebook,
enter the IP address (LAN).
• When the VE-PG3 host name is registered in the dynamic DNS or static IP
address in your party's Phonebook, enter the specified host name (ex. tel-
ephone) or domain name (ex. icom.co.jp).
6-30
[V/RoIP]–[Peer to Peer]
(Default: Inhibit)