Vlan Status - ZyXEL Communications GS1915 Series User Manual

processes the VLAN rules in sequence. The sequence (priority) of the VLANs is:
Vendor ID Based VLAN
1
Voice VLAN
2
MAC Based VLAN
3
If the packet matches a VLAN rule that has a higher priority, for example, an entry with weight 250 in the
vendor ID to VLAN mapping table, the Switch assigns the corresponding VLAN ID to the packet and
stops checking the subsequent VLAN rules.
9.2.0.2 Select the VLAN Type
Select a VLAN type in the Basic Setting > Switch Setup screen.
Figure 89 Basic Setting > Switch Setup > Select VLAN Type
802.1Q Static VLAN
Make sure 802.1Q is selected in the Basic Setting > Switch Setup screen.
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.

9.3 VLAN Status

Use this screen to view and search all static VLAN groups. Click Advanced Application > VLAN from the
navigation panel to display the VLAN Status screen as shown next.
Chapter 9 VLAN
GS1915 Series User's Guide
120