Moving the device
Where to install the device
Secure a suitable installation space before assembling the device.
The place of installation must have space required not only for the device itself but also for
plotting operation.
Model
JV3-75SPII
JV3-130SPII
Working environmental temperature
This equipment should be used at 20-35
According to the surrounding temperature condition, the temperature may not rise to the
set value.
Precautions in installation
Do not install the device at the following environment.
A place exposed to
direct sunlight
A place that is not
horizontal
Width
Depth
1850 mm
750 mm
2390 mm
750 mm
500 mm
JV3-75SPII
JV3-130SPII
A place in which temperature and
humidity vary by a great margin
Use the device under the following
environment.
Operating environment:
68 to 95
o
35 to 65% (Rh)
A place that vibrates
Height
1240 mm
About 120kg
1240 mm
About 165kg
* The exhaust unit is available as an option for JV3-75SPII.
500 mm
2850 mm
3390 mm
o
C to implement a stable print.
F (20 to 35°C)
- 1.2 -
Gross weight (with exhaust unit)
(About 130 kg)*
(About 175 kg)
A place exposed to direct air
blow from air conditioner, etc.
A place where fire is present