Table of Contents
Advertisement
Setting time [TIME SET]
The device incorporates a calender. [TIME STAMP] function of the FUNCTION mode
displays the date and time depending on this setting.
• Only Time can be set. Date cannot be set.
STEPS:
1. Select the [TIME SET] and then press the [EN-
TER] key.
2. Check the date and time.
Press the Jog key [ ] or [ ] to check the current date and
time.
3. Press the [ENTER] key.
4. Set the time.
Press the Jog key [ ] or [ ] to select the digit of hours and
minutes.
Press the Jog key [ ] or [ ] to change the value.
5. Press the [ENTER] key.
6. Displays the set date.
Press the Jog key [ ] or [ ] to check the date and time.
7. Press the [END] key twice.
The menu returns to the LOCAL mode.
page 4.10
TWICE
- 5.27 -
MAINTENANCE
TIME SET
< ent >
MAINTENANCE
DATE
= 2 0 0 7 . 11 . 0 9
MAINTENANCE
TIME
= 01 . 2 3 . 4 5
MAINTENANCE
TIME
= 01 . 2 3 . 4 5
MAINTENANCE
TIME
= 01 . 2 3 . 4 5
< LOCAL >
width : 1272 mm
Advertisement
Table of Contents
