Setting Time; Setting Unit (Temperature/ Length) - MIMAKI UJF-7151 plus Operation Manual

Chapter 3 Setup
Function name
SET OPTIN JIG
SET JIG
( P.3-27)
Accept Position
Accept Height
Work Change
*5
Position Set
( P.3-27)
Collect Position
Collect Height
Reverse JOG-X
Auto Display Off
SETUP RESET( P.3-28)
*1. Settable when both of DHCP and AutoIP are [OFF]
*2. Settable only when Auth. is not OFF
*3. Settable only when Auth. is POP before SMTP
*4. The "Remote Control" function is only supported by the UJF-7151plusII.
*5. Settings are only valid when "MDL commands" are used to control the printer

Setting Time

You can set time of your country (time difference).
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
press the
Press
3
press the
• Hour/Minute/Second/Time selecting:
by the [][] keys.
• Hour/Minute/Second/Time inputting:
by the [][] keys.
Press the
4
end the setting.
• -15 hours to +4 hours can be set.
3-20
Set value
Set the installation / removal of the Kebab MkII L system (optional item).
FRONT / REAR
Bottom / Top / On Print
FRONT / REAR
Bottom / Top / On Print
ON/OFF
ON/OFF
(MENU) (>>)
to select "TIME" , and
key.
to enter time, and
key.
key several times to
Default
If using MDL commands to control the printer, set
FRONT the front/rear position of the table for receiving
work.
If using MDL commands to control the printer, set
On Print
the height of the table for receiving work.
If using MDL commands to control the printer, set
FRONT the front/rear position of the table for collecting
work.
If using MDL commands to control the printer, set
On Print
the height of the table for collecting work.
When setting the origin with the Jog keys, press
OFF the Up/Down key to specify the direction in which
the table moves.
The screen will automatically turn off after a
OFF
certain period of time (30 minutes).
All setting values are returned to the status
default.

Setting Unit (Temperature/ Length)

Units used by this machine are set.
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press to select "mm / inch", and
2
press the
Press to select a set value, and
3
press the
• Set value of length
Press the
4
end the setting.
Meaning
(MENU) (>>)
key.
key.
: mm / inch
key several times to