Panasonic PN28160A Operation Manual page 225

<Configuration Example 1>
Overview: Set up port group 1 and port group 2. Port 3 is to be the shared port.
Then, disable the port group 2.
(1) Set up port group 1 (member ports: 1 to 3).
(2) Set up port group 2 (member ports: 2 to 4).
(3) Disable the port group 2.
M24eG> enable
M24eG# configure
(1)
M24eG(config)# port-group 1 name Group_1 member 1-3
(2)
M24eG(config)# port-group 2 name Group_2 member 2-4
(3)
M24eG(config)# no port-group 2 enable
M24eG(config)# end
M24eG#
Fig. 4-10-2 Example of the port group configuration
225